Customer Reviews for VEVOR Bucket Tooth Bar, 1200 mm, Heavy Duty Tractor Bucket 6 Teeth Bar for Loader Tractor Skidsteer, 2000 kg Load-Bearing Capacity Bolt On Design, for Efficient Soil Excavation and Bucket Protection

good product, unfortunately one of the teeth was missing its retaining pins. never fitted

Extremely cheap Chinese Crunchie chocolate metal. Already 2 teeth broken after 5 hours of work. Can’t believe Vevor sell this kind of garbage.

I bought the tooth bar a couple of weeks ago for my 72" skid steer bucket. The holes don't line up. The tooth bar will not clamp on. When you tighten the clamps it pushes the bar off the bucket. It's still out on the ground. Haven't been able to use it. Not impressed.

broke a tooth off already. advert is misleading saying its heavy duty on website, but in the manual for the teeth it claims to be a for debris. teeth bend easily and weak points due to set screw location in cricital stress area (hence the broken tooth and others with similar outcomes) maybe worth it if you don't expect much out of this

I was impressed with the heftiness and quality of the toothbar. However, the predrilled holes are in a bad spot for my bucket which is on a John Deere 1025R 50". The holes are directly over the weld at the edge and the bucket frame. I had to drill new holes through the toothbar and the bucket edge. It took a while and after $75.00 worth of bits, I finally got the right combo to drill the holes. Hopefully the predrilled holes are better aligned on your brand of bucket.

i have ls xj2025 tractor it did not really fit my tractor - i still have not used as am still custom fab parts like weld metal and drilling holes to secure this item we shall see i have well it works

Very disappointed. The holes on the tooth bar do not line up with the pre drilled holes on the Kubota BX23S bucket. They are not even close. The bar seems very sturdy. Would have been great if the holes lined up.

the bar is pretty heavy built and it performed well for 2-4 months then it lost a tooth then not long after that a bolt sheared and i couldnt see it and bent the bar in a way it couldn't be straightened. in all fairnessit did see lots of abuse digging into really hard clay several hours a day.

soft steel , two teeth already broken , air bubbles in casting where teeth broke ... no strenght ..

Good concept but the casting very bad. I had one tooth adapter snap and it was like sand inside. Vevor will replace eventually, at least 6 or more contacts but if you persist they will give in.