Customer Reviews for VEVOR Awnings for Door Entrance, 38 x 117 in, Exterior Front Door Window Awnings with Drainage & ABS Bracket, Rain Snow Sun Protection, Overhang Polycarbonate Door Canopy for Porch Patio, Clear

its an ok product but be sure to put silicone everywhere the panels slide into the frames if not they leak like crazy and the water gets in the panels

It is definitely a two-person job putting this thing together it's in a zillion parts.. I would like to see this thing shipped as one piece.. this is not a piece for an amateur mechanic to put together..

The measurements are deceiving. Turned out the awninh was 40 wide and 38 long. So awning didn't fit. Was able to sell it to a friend. Product is acceptable

This was extremely difficult to put together, most of the screws broke off when we put them in the awning. Hope it holds up in the rain, etc. It is exactly what I wanted over the door to keep rain off the deck. It looks great now that it is up but it took ALL day to install, we are near 80 yrs old, don't recommend for old folks to put together .

When I received the first shipment it came in as repackage Merchandise damage panels no hardware. But when I contacted support they took several days to make things right. New package came in today I went to assemble it but some hardware missing had to go to store to get screws that where missing, quality control is missing on the packing line. You need two people to put unit together it is not a one person job, the hanging brackets are steel cross members are thin aluminum channeled. The panels are cheaply made, not real strong plexiglass seems flimsy construction and I do not know how they will hold up against New York winds or snow I will have to get back on that matter. The unit as a whole would have been made better with real plexi at least 1/4” thick along with the stronger channels that they mount to. The instruction manual is not clear as they could have made it they did put a video out but watching it does not really portray the real assembly as clear. All manufacturing of parts and Manuels should be clear but they are computer rendered with Etcha Sketch I realize this is made in China and they do make some wonderful things well, but every company can improve to make things better to make that company great and want to grow larger with better products. Note: I have purchased other products from this company and they work well without problems.

Disappointed that the frame was plastic. I live in a cold climate so don’t know if it will standup to the harsh weather.

Good day too you my order was in time that was very impressive the only thing I did have a Problem with the Frontal fixing Bar were Damage other from that everything where great looking too buy again. Thanks Richie

Seems to be well made. You do need help assembling as it is hard for just one person to hold everything together. I have not been able to install as I have to make a template for the mount holes to mount as the template sent was paper and was damaged during shipping

I really like the idea of the awning it seemed like a wonderful item I put it up about 3 weeks ago and a week ago I noticed it was coming apart so I took it down took it all apart and then put silicone in every seam and every joint then put it all back together then silicone all the way around every edge to make sure it wasn't going to come apart and then screwed it back up let's see if it handles New Mexico sun and wind other than that seems like a great product

Cheap plastic shit. Looks esthetic but just piece of cheap polished plastic. The adds just over hyped the product to fool buyers. I managed to get it installed and the first strong wind ripped it all apart after just 5 days. I wasted my money and looking for a way to request a full refund.