Customer Reviews for VEVOR Automotive Smoke Machine Leak Detector, DC 12V EVAP Vacuum Diagnostic Tester with Built-in Air Pump & Flow Meter, 1 PSI Vacuum Pipeline Fuel Diagnostic Detector for Cars, Motorcycles, Trucks

Todo correcto, llegó bien y como en las imágenes

It didn’t have all the accessories like it shows in the picture but I made it work

This machine did work, but it didn’t work right away. For some reason, I had to remove the cover to try to see what’s going on, and then it just started working. Not sure what the issue was, but it did eventually work pretty nicely. You probably also should probably run a fan across this machine. It overheats easily. I actually kept it cool with a blow gun.

The product arrived very quickly. However, there was a problem with it. The part used for pumping was damaged and air was leaking out. I requested a replacement, but it’s been 18 days and I’m still waiting for the replacement part. Their customer service is very poor. I won’t be buying anything from here again. I can’t use the product I received because it’s defective.

Went to use it and it broke before I could use and and its a pain to deal with customer service

90457769899 cette commande n'a jamais été livré

Nunca llegó pero me devolvieron el importe con un suplemento de 10€

unit work ok but parts missing and have been in contact for four (4) days with Vevor with still no results. Appears that the service department/customer service responsible for missing parts is not really a department. Especially with the emails they are sending me are not really connected. They are asking which parts are missing, sent them two pages of their description of parts with their description of items and they are still asking for the same information (sent to Vevor two (2) times of images). Seems they do not have their own manual to verify. I have purchased several item with not problem but with this purchase this has turned me away from Vevor. So sad and dissappointed

This machine makes a ton of smoke and uses a fair amount of oil when using. My only complaint is that it produces way too much pressure. most evaporative systems on a car are tested at 1.5 to 2 PSI. this runs at 19 PSI. When used on an evap system I hear popping and clunking noises from the tank area and am fearful that it will damage the tank or pop out the many grommets . check valves and sensors that are mounted in the tank. It needs to run at lower pressures. The way it is it is only safe to use for engine intake manifold and exhaust leaks

Minden fasza csak nem az jött amit rendeltem!😒