Customer Reviews for VEVOR Annular Cutter Set, 6 pcs Weldon Shank Mag Drill Bits, 2" Cutting Depth, 1" to 2" Cutting Diameter, M2AL High-Speed Steel, with 2 Pilot Pins and Portable Case, for Using with Magnetic Drills

Works great. Easily cuts thru 1/4 square tubing 16 times and still has plenty of life left. Would definitely buy again

Livraison rapide (2jours), semble résistant, très belle finition, livré dans son coffret comme décrit, pas encore testé, un très bon complément pour une perceuse magnétique, merci.

good quality cuts perfect holes and easy to set up

They are sharp and last well. I cut 12+ 25mm holes through 20mm of steel just using cutting fluid acting as coolant, the last hole cut as easily as the first. For the price, highly recommend this set. Holes were clean as can be, no burrs or anything.

Work flawlessly love it

bonne qualité perce tres bien je recommande de mettre de huile de coupe pour quel dur mes normal on dois tjs en mettre mes a date je suis tres satisfait

I use these Vevor annular cutters in a knee mill with R8 adapter I already own. I am surprised at how often I use them. I do not hesitate to get them out if the need arises. no stress from these things. I mainly bore through steel less than 1/8" thickness. I go slow with proper lubricant. No issues with performance or wear noted with their somewhat limited use, but the most common size I use is also doing just fine.

Drilled 90 holes into 1 inch plate with the 5/8 bit. Could tell it was not quite as sharp as when I started but very happy with bits. Seem to be very good quality.

These bits cut mild steel like butter. Clean and quick. Works great with my VEVOR mag drill.

Top kann ich nur weiterempfehlen