Customer Reviews for VEVOR Adjustable Click Torque Wrench, 12.7mm Drive, 27.1-216.8 N.m, Dual-direction and Dual Range Scales, 72-Tooth, ±2% Precision, with Adapter Interchangeable Jaw and Ratchet Head

Clé qui fait le travail. Attention toutefois : si vous comptez l'utiliser pour le serrage des raccords frigorifiques, vérifiez qu'elle permet bien d'atteindre le couple de serrage préconisé par le constructeur. Pour ma part, j'ai dû improviser pour obtenir le couple minimal requis sur un raccord en 1/4".

Great tool. Excellent value. Thanks a lot.

Schnelle Lieferzeit, muss es leider zurückschicken, hab 20 nm gebraucht aber in der Bestellung nur auf lbf 20 geachtet..aber sehr gut verpackt im Koffer, und richtig massiv.

Sehr gut verpackt, schneller Versand, super Preis - Leistungsverhältnis. Schon mehrfach eingesetzt, funktioniert wie er soll. Sicher nicht mein letzter Einkauf bei Vevor.

Las instrucciones no son muy claras

Accuracy checks OK.

Works great. Save hundreds over the hilmar version specifically for HVAC.

Working

I purchased this to help set up a few mini splits and properly torque the line sets. It worked perfectly. The torque settings are accurate and there measurements are easy to read. It may help to convert from NM to Lb-Ft first just because this was clearly designed and labeled with Lb-Ft in mind and the measurements are much easier (see pictures). The head can easily fit any normal size HVAC nut. With any new torque wrench I always recommend turning the torque all the way down and "clicking" it with your hand. This makes sure it is working properly and gives you a feel for what the click is like. If you are doing an HVAC install I have a little advice with this. You are probably going to be using this with Nylog Blue and there is a ton of bad info online about that stuff. The Nylog is used in tiny amounts only on the inside of the flare. If it gets on the outside of the flare or on the threads it can mess up the torque-ability and the nut will never tighten properly. Also, all the videos online show people using a torque wrench with a monkey wrench, but using this with a simple vice grip is WAY easier. Just don't clamp it very hard.

Pratique avec les têtes interchangeable , un must have