Customer Reviews for VEVOR 9U Open Frame Server Rack, 584.2 to 1016 mm Adjustable Depth, Free Standing or Wall Mount Network Server Rack with 360° Casters, Heavy Duty 4 Post Holds All Your Networking IT Equipment AV Gear

Very well made good quality and well constructed materials excellence finish and delivery reliable.

Tout d'abord sur le rack en lui même, c'est bien fait, solide et facile à monter. Je voulais remercier le support Vevor, j'ai reçu le colis avec une plaque abîmée lors du transport et ils m'ont rapidement proposé une expédition d'une plaque de remplacement puis un remboursement de 20€ quand la logistique n'a finalement pas pu m'expédier la plaque de remplacement C'est sérieux

No complaints, it lines up fine. Sure, there’s going to be a little brute force pushing here and there, welcome to working with stamped metal. For what this costs, I’d buy 50 more, without batting an eye. It’s mounted to the wall, which is perfect for my application. The problem that some may face is that it is a wall mounted, 4 post rack, so when mounting it to the wall, you lose the ability to fasten devices at both ends, essentially becoming a two post rack with some added rigidity. If you are mounting switch’s, shelves, and shorter devices like pro-audio equipment, you’ll not have any issue. If you want to mount a 24” deep server, it won’t work for you. If you have a really deep UPS unit like my 20amp Liebert, then put it on the bottom most slot, and use a block of wood, or be a real man and 3D print a wedge that you can use to support the back of the device and use the rear, bottom of the rack as a base. The UPS unit will not sag or bend up its mounting ears over time. That UPS unit which is now properly supported, serves as another stable base for other heavy devices that can go on top of it. The same kind of rack is hundreds more from competitors, but if you have 10 cents of plastic, or a free piece of wood, you can easily overcome any potential area of concern and your network devices will be solid.

I am really surprised by this rack, when put together very sturdy, not expected below a $200 rack of the same stature.... I actually have started using more Vevor products as of late, they seem to be pretty darn good at a good cost, they also ship quickly.

Goes together easily Holds my network gear. Shelves are sturdy enough.

got this to organize some of my home lab equipment. This is a workable inexpensive rack. You have to build it yourself and if you don’t have an electric screwdriver, your wrists will hate you. It works and it’s cheap. No side panels. Casters are solid and work well.

Very good quality, use this from my home lab, thick gauge steel with very thick powder coating hard to scratch and adjustable.

Purchased for a temporary project, this rack was used to hold three Lenovo servers, a PDU, a network switch, and patch panels on both sides. Assembly was straightforward, and I extended it nearly to its full length. I also had a woodworker make a custom tabletop for it, which turned out great and gave it a polished look. One note worth mentioning is that this was due to my own setup, not the build quality. After the project, when I removed the three Lenovo servers, I noticed the wheels had bent inward slightly. I had overloaded it by adding too much server weight and also placing an exceptionally heavy Alienware Area-51 on top. The wheels bent back without any problem, so it was ultimately not an issue.

Does it's job. Isn't too difficult to assemble. Has adjustability in the case your equipment isn't standard size. Wheels are a nice addition, and the top is strong enough to support a monitor and keyboard/mouse. Not bad for the price.

This is my third frame server. Excellent and very sturdy, has everything that we use when working with racks and networking. Highly recommended