Customer Reviews for VEVOR 90 Gallon Sandblasting Cabinet with 1.8 Gallon Dust Collection System, 40-120PSI Sand Blasting Cabinet with Stand, Heavy Duty Sand Blaster with Blasting Gun & 4 Nozzles for Paint, Rust Removal

Working on assembling this unit with all the upgrades. This unit will allow me to clean and prepare rusty parts for painting for restoring vintage cars.

I absolutely love this blast cabnit. Great quality, and went together fairly simple. Pretty similar to harbor freight 60 gallon but better for #1 you can load from the front top so you can fit bigger objects definitely worth the money

Cabinet appears to be well constructed. Dust collection system very powerful. Assembly instructions not very clear or detailed. Hoping for many years of use.

The overall quality was impressive. Very tight tolerances, which lead to a problem due to the wrong weather stripping being shipped with the unit. But the quality of the cabinet was a nice surprise. I am using it in my wing business, www.wingsforchrist.com https://youtu.be/OhZcDNhGCME?si\=uLoTwxqZ5S3vM-p5

Nice, sturdy cabinet; especially for the money. Big enough for many jobs, can even get an engine cross member in it. Assembly was pretty involved but it comes with everything needed to put it together, hardware, gasketing, silicone, even a roll of Teflon tape. I made changes to a few things I didn't like and I think it's going to serve quite well. It came with an LED light with a wall mount power supply, I bought a 120 v fixture. The dust collector is good but noisy, it's really just a shop vac in a can. I made a shed enclosure and mounted it outside. I wired it and the light together, now one switch get both. Last, manipulating parts while holding a gun trigger would be difficult at best, so I bought a foot valve, took out the trigger parts and plugged the opening. I'm running the cabinet at 90 psi and it's working great.

Not bad for the price. The instructions leave a lot to be desired. Also had to straighten 2 bent panels and repair the wiring connectors on the light. They crimped the connectors over the insulation so the wires weren't making contact all of the time. It would work then stop, then work and so again. This thing is heavy and delivered by FedEx, so expect bent panels. The wiring was a bit annoying, simply lack of attention to detail. After the minor repairs, everything went together well. I took away a star because three sure annoyed me. Had it assembled 3 times when it began working again then had to take it back apart. Took a while to find it because it was on the wires that were pre-installed on the switch. Overall, for the price, you could do worse.

It took me about three hours to put this sandblasting cabinet together. The instruction manual leaves a lot to be desired, but it was fairly easy to figure everything out using the manual as a visual guide. All of the screws were laid out in a convenient plastic separator. Unfortunately, one of those Containers had broken open and was laying in the bottom of the box. After putting it all together, I used it for the first time. The vacuum system is very powerful and very noisy. The silicone tubing that came with my kit was very difficult to use, so I ended up buying a couple of canisters of silicone caulk to apply to the inside of the cabinet. Despite this, the blasting media still gets everywhere. I bought casters for the bottom of my cabinet, making it very easy to maneuver in my small garage. I can also move it outside to avoid covering everything in dust if I want to sandblast something. Overall, this is a great system for home DIYers that is built well and should last for many years.

Good cabinet blaster glad I bought it, love the whole top opens up and love the exhaust system,have not had an issue with loosing blast material