Customer Reviews for VEVOR 7-Day Programmable Thermostat, Home Thermostats for Heat Pump,Air Conditioner,Underfloor Heating, LED Screen with Backlight & 1Cool+1Heat,Energy-Efficient,Wide Temp Range,White

Worked great with my film under tile floor mat!

I have had this thermostat installed on my heated tile floor for about a month now and it is working fine. It replaced the original of another brand that lasted 5 Years. The clock is accurate, readout is nicely backlit and easy to read, installation was easy as was programming. Set it up, let it do it's thing and enjoy warm feet.

I have two of these thermostats installed and they work well. There is a learning curve programming any thermostat, it was pretty easy overall. Something that may change the temperatures you set, the thermostat waits till it gets 2 degrees higher than the setting before turning on. This is great for efficiency, just bear it in mind when when setting your temperatures. I'm in Florida and have only tested the cooling function so far.

I wanted a 7-day programmable thermostat and didn't want to go down the Smart thermostat route. I really appreciate the simple design of this and am even more appreciable that there's no logo plastered on the front. I didn't wire it correctly at first (my fault entirely) and chased my tail for a while, but in that time I spent a lot of time dealing with the settings in the secret menu (it's not really a secret -- read the manual to access it). This is a bit like Android versus iPhone -- other brands might work out of the box, but this one does take more effort. Said effort was worth it to me so decide accordingly. My (minor) gripe at this point is that between midnight and 1am, the display will read "0:##", not "12:##" like virtually all other clocks displays. There is an option to set the clock for 12hr or 24hr format and it uses a "12:##" format after noon in both cases, so this is purely isolated to midnight from what I can tell. Regarding other reviews, it is very possible to have it display the temperature when in "Off" mode. Read the manual. It is also very possible to adjust the calibration in case the displayed temperature does not match your reference value. Read the manual. If you want to go even more extreme, it'll also let you adjust the hysteresis and a bunch more other things (you guess it, read the manual!). There's no fancy phone app to adjust this, which although a little annoying, is fine since it's a onetime thing. To reiterate: Setup is required. If you're willing to spend just a bit to dial them in, you'll end up with a great product!

Works well. Bright display. 2 quirks that I did Find a little annoying. Does not increment in .5 degrees Celsius for set temp but does display current temp to one decimal point. So can’t set at 22.5 only 22 or 23. (Yes, I could always use F for more precise measurement) Functions are auto, cool, heat or OFF. In off mode does not display current temp just a blank screen. My previous thermostat displayed current temp and date even in off mode. Like I said, small annoyances.

It is working great, I installed it and my wife set up the programming. It has been doing great. I would recommend it.

I like this Thermostat. It works, at a good price.

The product works the problem I had was with accurate readings. I had the heat set to 70 and it would never go above 66 and the system kept running. Maybe it's isolated to my situation but because of that I went with another thermostat.

Sadly, this unit was not compatible with our heating system and was not feasible to return to Vevor. If you order anything from this company, be 100% sure it is what you want because returns are basically non-existent.