Customer Reviews for VEVOR 58 cc Gas Chainsaw, 508 mm Gas Powered Chainsaw, 2.0 kW Power Chain Saw with Non-Slip Handle, Gas-Powered Chainsaws with Dual Fuel Tanks, For Wood Cutting, Tree Trimming, and Land Clearing

I received this chainsaw from VEVOR and was excited to try it out. After all, who could resist a 62cc saw for that price. I assembled it and ran it for about 10 minutes slashing limbs from a downed tree on my property. It ran "Ok", but not great. It didn't really want to idle and would stall out. I brought it back to the garage and confirmed everything was assembled correctly. I test fired it several times and it would run for about 2 seconds and then die. I disassembled the unit to check that all the fuel lines were in good shape and not kinked or anything. All looked good. After some frustration, I reached out to VEVOR requesting a return/exchange. They offered me two options. One was to return the saw and they would replace it, or they would refund about 50% of the purchase price and I could do whatever with the saw. I decided to take the money and shelved the unit. A couple weeks later, I was servicing some other equipment and decided to give the saw another go. Nothing had changed. It would fire then die. I broke the saw down again and cleaned the carb out to make sure there were no blockages. I found a little debris in the carb which I cleaned out. I refueled the unit and fired it. It ran for a bit longer but was still struggling. I decided to make some adjustments to the carb (low/high and Idle). It took a bit to get it so it would idle but it finally started to run. After some tweaking of the low/high I was able to get the engine to stabilize and run. I kept tinkering and sure enough I got it dialed in. Now it runs great. I bucked some logs yesterday and it performed as it should. I think it is a useable saw now. FYI, I live in the Colorado mountains so altitude was the biggest factor in readjustment of the carb. Additionally, there was likely some debris in the carb from the manufacturing process. CONCLUSION: This saw is a great saw for the average homeowner, but it may take some adjustment to get it to run correctly depending on where you live.

Used it for a multi day clearing project. First day it ran really good. 2nd day half way through it wouldn’t crank after a refuel. Battle this the next day till I just gave up. It will crank once it’s cool I believe.

Loved it but after I used it a hour it won't idle or run right

It can’t start without start gas! When you finikky get it to start it works good. But you will never know if you will be able to start it. I think the problem is suction, when it finally starts with gas then probobky it can take fuel from the tank. Very good price if it would have been working but if the price is too god the item is not

Super tronçonneuse, elle fais le taff sans soucis Le gros soucis c'est que la pompe a graisse ne fonctionne pas ... Donc aucune lubrification de la chaîne A pars cela rien a re dire super rapport qualité prix

Muy china!!!!!

The quality of the saw could be better such as the fuel tank and the reservoir for the bar oil si that there not leaking.

The saw had initial issues at the beginning and wouldn't start. I had to get a new spark plug, and then go through the clearing procedure recommended in the online troubleshooting guide. It required removing the spark plug, standing the saw vertical with bar pointing up, then pulling the starter about 15 times to clear out the cylinder. Since then it has started regularly. Other issue is the fuel tank cap. It is positioned at the bottom and leaks like a sieve. Because of this the saw runs out of fuel very quickly, as most of it leaks out. Hard to beat the price though.

Not that happy with this purchase. I've been out firewood cutting with it once. It started fine but kept cutting out after just one cut. I've contacted support but so far no reply.At the moment I wouldn't recommend and it they don't sort it for me very soon I'll be returning for a refund.

Très content de l'avoir trouvée avant de pouvoir entrer dans le "haut de gamme", normal dans quelques années minimum de nouveau, un jour, mais le plastique du carter est très fragile, trop fragile, s'est fissuré au repos sans choc, ni gel d'ailleurs, ce serait bien de trouver des pièces et chaînes qui me semblait pourtant correcte mais s'est bloquée et tordue ensuite étrangement mais très bien affutée a priori (deux utilisations avant puis une troisième...), plastique à solidifier impérativement ce ne sont des jouets, le lanceur tient pour le moment enfin, relation difficile de SAV ne comprends pas bien les tickets, finalité, modalités ?! visiblement l'espace de chargement de cliché est trop réduit etc.