Customer Reviews for VEVOR 52 cc Gas Chainsaw, 455 mm Gas Powered Chainsaw, 1.8 kW Power Chain Saw with Non-Slip Handle, Gas-Powered Chainsaws with Dual Fuel Tanks, For Wood Cutting, Tree Trimming, and Land Clearing

The drive clutch slipps and there are no trouser teeth. Hard to start. I'd like to return it.

Maschine springt bei warmen Wetter nicht nicht oder nur sehr schlecht an. Kettenspannung umständlich.

I needed to cut down some dead trees in the backyard. Company quoted way too much money. Tried the sawzall method. Nogo. Homedepot was expensive and I just need to solve a tree problem for as cheap as possible. It was a PITA to get started at first. Once I got it running it starts 1-2 pulls no problem. Was constantly re-tightening the chain. It's adjustment system is not very effective. You basically unbolt the entire bar and pull it right while tightening down the retainer bolts. There is an adjustment screw but I could the bar method more effective. The chain has broken in now and is running better. All in all it works. It's not perfect. But it works.

Item appears to be fairly well built but the design .... not so.much. The plastic clips used to attach the blade cover are easy to dislodge and breK. The first time I installed the bar and blade the plastic clips on the cover broke off when placing cover over back over the blade. The broken clips make the saw unusable because the cover will not stay on and leave the sprocket exposed.

After you run it for a while it wouldn't start mine broke after I used it for maybe a month

When new cuts very well. Screw to tighten chain is located in an awkward location. It took a bit of looking to finally figure it out. The biggest disappointment is the pull cord spring mechanism did not last long. Pull cord will not retract properly and soon will be inoperable.

Piła doszła nie działająca. Pilnie potrzebowałem piłę i nie miałem czasu na reklamację i zwroty więc dokonałem naprawy na własny koszt. Niesprawny okazał się przycisk wyłączania piły, który uniemożliwiał jej uruchomienie.

When the saw arrived, I went through the startup procedure to get it to run the first time. There is no primer bulb, so I’ll make it work. Pulled so many times, so many times before it even sounded like it was going to to fire off. All together, I could say there were over 200 pulls or more. I was getting ready to send it back. I made the efforts. After taking a break, before I pack it up. A friend pulls on it without a choke. It popped off. 2 more pulls and it started & died. Pulled one more time & it started & idled until I shut it off. The next morning, it started on second pull& ran fine. I havd only used it on one big branch that came down. Maybe. 2hrs. Of use. It starts every time, so far. My sister can start it, because she used it on more limbs. Other than some pulsing at partial throttle. There is none at full throttle. For the price? I was willing to gamble. I think I’ve got my moneys worth already. I’ll dress up teeth, and start the next project.

Works good. Light weight. Cranks good. Cuts good. Leaks chain lube pretty good - over oils? Chain tightener and brake mechanism is a pain but ok for the price. Have patience when changing the chain, gotta line things up perfect

The good- Saw has a lot of power. Rips through the wood. Has the easy start feature so youre not yanking the cord to start. Overall good saw for the low price. The bad- 1. the handle is very weak. After the first time getting pinched, the handle bent right over when I pulled the saw out. 2. The tension screw is in a horrible place to tighten your chain. Facing along the angle of the bar and right up against the bar. So it gets gummed right up while cutting and even using a 90⁰ driver it's still a tight fit. 3.The 20inch bar is not a true 20 inch fit. I put a brand new chain on and had to have the tensioner maxed all the way out and the chain was still loose.