Customer Reviews for VEVOR Rotary Welding Positioner 50KG, 0-90° Welding Positioning Turntable Table 0.5-6RPM 120W, with 12.4 Inch 3-Jaw Lathe Chuck & Welding Torch Stand Holder for Cutting, Grinding, Assembly, Testing

Bin sehr zufrieden mit dem 120 W-Schweißpositionierer (0,5 bis 6 U/min.). Die Drehzahl lässt sich bei feinfühliger Einstellung auf ca. 0,1 U/min. reduzieren. Dabei ist trotzdem genügend Drehmoment vorhanden. Damit sind WIG, E-Hand, MAG und Plasmaschneiden gut machbar.

I bought this version of the 3 positioners for one reason. It will run slow enough to allow both Mig and Tig welding operations. The others, as others have said are OK for Mig but too quick for Tig. This model has a different motor/gearbox arrangement than the other 2. Testing today showed the gearing is slower than the specs say. My testing over 1 minute duration, with the adjuster knob just above zero and the time on 1 minute showed the turn table had only rotated approximately 0.2 RPM measured at the Platten edge. I have tested the mig function by welding together pie cut sections in to a 90 degree bend. This required rotation for 47 seconds to complete the weld on 32mm ERW tubing. Testing for Tig use is ongoing, but for the same size tubing. 38 X 1.6 wall. My initial estimate of rotation speed is 1 min and 10 seconds for one rotation. Easily within reach as the adjuster is only about 1/3 open.. The unit was delivered within the timeline and was well packaged. Assembly was easy. To be constructively critical, the mig stand is a blessing but really needs some more substantial tightening arrangements The wingnuts are too small to lock things in place. Having said that, the price whilst a significant jump from the 30kg version, does include this amazing adjustable arm wrest/mig attachment. Get the setup right and you almost have a robotic welder. I am thoroughly impressed with this product, representing great value for money. I did have a small issue with one of the relays in the control box. Vevor we're all over the issue and had a resolution in a few days. A replacement relay is on its way. After sales service is the best I have been involved with. Well done. For the doubters, I bought this myself, I get no kick back from vevor. I am a retired maintenance worker from the oil and gas industry. Just trying to learn Mig/Tig as a hobby. Trying to manufacture exhausts in stainless steel.