Customer Reviews for VEVOR 4PCS Machinery Skate Dolly, 11999.8 kg Industrial Machinery Mover, Heavy Duty Carbon Steel Machinery Moving Skate & 4 Carbon Steel Wheels and 360° Rotation Non-Slip Cap for Warehouse, Factory

I bought these to move a 2700 lb lathe and they worked very well. Rotating them under load was not as smooth as I'd have liked, but I made it work. Getting them rolling was very easy, however, and the wheels held up very well. These are the sort of thing that if you need them, you REALLY need them. I don't know how they'll hold up over time, but they earned their cost on this one job for sure!

We used 4 of it to move a machine weighing approx. 2500 kg. It worked well on a flat and even hard floor. The handle is connected in the middle with screws that are much smaller in diameter than the holes. That makes the handle wobbly. All in all it worked, but the quality is only medium.

Satisfactory/adequate. Thx

They roll very smooth, so smooth you have yo be careful setting them down or they will escape! Rolled my 5000 lb equipment easily enough but the surface needs to be kept clean or they will put the brakes on you. Only reason for the 1/4 star off is they walk bad, and I wish there was a way to keep them attached to the equipment.

Ottimo prodotto,migliore di quello che avrei trovato dai miei fornitori su Torino. Spedizione tracciata con tempi di consegna rispettati. Non si capisce però come ottenere la fattura..... Stefano

Good product, works well for what I have used it so far. I like that the center pad does rotate but I wish there was a rubber surface so it did not slide so easily. I added that myself to my own skates.

I used these to move equipment in the 8000-10,000 lbs range. The job was accomplished, so hard to complain, but there are three things that could be better or would be a better choice. First, these have urethane wheels and that made moving the equipment harder. This was a bad choice at my end to save some money, they do offer solid steel wheels and would be my recommendation. I suspect this added a couple hours to my move. Probably not a problem for equipment weighing less than 5000lbs or so, but really there is no goo reason not to just get the steel wheels in hind sight. Next, the ball bearings fall out from between the bottom and the rotating platform. Tighten the bolt on top right when you get it and use locktite. Finally, the nuts on the bolts running through the wheels are constantly comming loose during use. Either stake the nut to the threads or monitor these closely.

Works for smaller items, haven't attempted with anything even close to the weight capacity. And like they may break, but i might be surprised.

Buen material pero no gira tan fácil como aparenta. Las he colocado en una maquina de 2.200 KG y no las pude hacer girar. Rueda bien pero nada de giro

Good quality and construction however, because the wheels are on a fixed access, you can only move whatever object you have mounted on them in a straight line. They’re terrible for turning anything.