Customer Reviews for VEVOR 3 Point Trailer Hitch with 50.8mm Receiver, 3 Pt Quick Hitch Attachment with Trailer Ball, Tractor Tow Drawbar Adapter for Category 1, Kubota, Mahindra, Ford, Yanmar, John Deere, Massey Ferguson

Le produit était clairement d'occasion des accros sur la peinture un peu partout ça sentait un retour refoulé c'est bien dommage quand on achète du neuf on veut recevoir du neuf.

Contrary to the product description, this item is NOT in fact compatible with a John Deere category 1 iMatch quick hitch. Customer service was very good as I received a partial refund and was allowed to keep the product.

The fitment is just about right for a Kubota BX category 1 limited tractor to maintain the 3 point angles when you raise and lower. A normal category 1 hitch is too tall to do that. This hitch, however, is far from heavy duty. More like light duty, and I question the legitimacy of the claimed ratings. Metal is thin, welds are poor, the little d ring style hook is laughable and useless as it is so thin it would probably break with any kind of strain. And while the pins threaded in fine for me, they don't have lands on the collars to tighten with a wrench. You have to stick a screwdriver in the holes to tighten as best you can. Nonetheless, this functions fine for my limited purposes, which is primarily to make short moves to park light weight trailers easily, which doesn't strain it. I wouldn't trust it for much else or on a tractor any bigger than this. Price is reflective of its quality and ability. It also arrived sticking through the box, so had been scratched up and rust started already.

It appears to be too high to attach to the top link on my Kubota Quick hitch system without some adjustment. I haven't installed it yet but at first look it will require some adjusting which I was not expecting.

Generally, the item is described accurately, BUT the quality of the metal components are insufficient for anything other than light-weight work. Specifically, the tube for the receiver is much too light weight. The manufacturer should have used true 2” Hitch Receiver Tube for the receiver. Any real pulling will damage the product. My product bent inward on the sides and flared outward on top and bottom (of the hitch tube). In order to get any value out of the hitch, I will need to repair and rebuild my item. The lift pins are of good quality. Overall, I would spend a little more money on a better quality item unless you can accept compromise.

It was discovered after receiving this item that it will not mount onto a quick hitch. This item was purchased specifically to be able to add a drawbar for a ball hitch or to mount my tool carrier, without having to remove the heavy quick hitch each time. But the spacing of the bracket for the upper arm of the 3-point hitch is too shallow to accept the top "hook" of a standard quick hitch. Happy wth the product otherwise. (Quality looks fine but who can judge until some time has passed so cannot really rate that - but it was a required field so i went in the middle with 3 stars.)

This thing is terribly made out of very thin steel likely 1/8" The plates that are welded on for the top link pin to go through are crooked and the holes are misaligned. I had to beat it in to my quick hitch with a 4# hammer, but ultimately was able to make it work. It is covered with welding spatter everywhere. For the price, I could accept the light duty construction, but it is extremely poorly made.

First time I used the 3pt trailer hitch to lift my equipment trailer it opened up like a sardine can and dropped my load. The manufacturer used two thin layers of metal mig welded together and thought this was sufficient. Bad engineering and unsafe as well.

à la première utilisation pour travaux léger le frame c'est tordu avec une petite racine de +/- 1/4 de pouce. Ne pas acheter....

Disappointed. I have a quick hit hitch on my 3 point for my chipper and land plane. This hitch does NOT fit a quick hitch, which is very disappointing. Do not buy if you plan on using with a cat 1 quick hitch. I should have read all the reviews, the last review described the problem.