Customer Reviews for VEVOR 3/6 Frame Electric Honey Extractor Beekeeping Stainless Steel W/ 3 Legs

Assembly is easy. I decided to cut the upper half off the legs and drilled new holes in the lower half so I could screw the spinner onto my heavy bench, which kept it totally stable and drained easily into 5-gal buckets. I spun it empty before screwing it down, and the internal basket assembly is well balanced so there was no wobble at all. Be careful to locate equal-weight frames opposite each other. The control is smooth, the motor silent, and balanced loads did not vibrate in the least. I do not know what somebody meant by microswitches in the access doors, there are magnets but no switches. Ran it at half speed for the first side, then reversed the frames and ran full speed on the second, then reversed again and full speed on the first side to remove all the honey. Total about 10-12 minutes to empty 4 frames at 85 degrees. This spinner is built well enough, though at one point when tipping it to drain completely, the thin gauge stainless barrel one side "popped in" and needed to be "popped out." This will happen once and you will learn how to handle it, so not a problem. Did a great job, very glad I did not get a hand crank.

We are relatively novice bee keepers (two years). This extractor worked exactly as it was supposed to with minimal effort on our part. As you would expect, since this is basically a pretty good size centrifuge, it must be bolted down or it will "walk" and become very unsteady. Initially, we mounted it on a single board about three feet square. That did not work. We then mounted it to 2x6s about five feet long in a V shape and stood on the ends of the boards. This worked perfectly. It took about 10 minutes to extract the honey from the two frames after the cells were opened.

Works exactly as described. Because this is a centrifuge, it needs a stable base to mitigate vibration. We built a mobile base using 2x4s and 1/2" plywood. The machine attaches to the base with nuts and bolts. We use 5 gallon buckets of water as the weights for our base while extracting, and it worked flawlessly! The extractor did exactly what was intended, and we are pleased. As others mentioned, the drum isn't perfectly round, but this hasn't affected the operation of the machine for us.We ran each side of the (med sized) honey frames for about 3-4 minutes at ~75% power, and 2-3 minutes at ~85% - 100%.

I gave this as a gift. When my son opened the box it had a dent in the side. He did bang it out and it works. The box was intact when we got it and it was packed securely so not sure why it was dented. Now we need to wait for the honey to be ready to use it.

This is a great machine and very reasonable price. It works very well.

I haven't been able to give it a real test yet as it arrived after this year's harvest. It was packaged well and went together easily. A test run showed that the basket seemed well balanced and there was very little vibration through the whole run from slow to full speed. If I had a complaint, it would be that the legs could be longer so that a 5-gallon bucket could fit under the discharge spout and the knobs on the plastic lids could be relocated (they hit the motor when opened and won't allow the lid to stay open without being held). I expect that this extractor will make next year's harvest much easier.

Arrived timely, saved hours of hand cranking I would recommend to any backyard d bee keeper

This is a great tool. It performed very nicely. It needs a stabilizer holder for the frames in the center to hold frames in place. Minor change. Also a bottom mounted drain would be an excellent modification.

straiten and it worked well

Excellent value for money. Excellent customer service also, when contacted customer service department they were so helpful even given 15 dollars credit for waiting for my order to be delivered. Will definitely shop again