Customer Reviews for VEVOR 2PCS 1U Server Rack Shelf, 254mm Depth, 22.68kg Max Load Capacity Vented Cantilever or Wall Mount Rack Mount Shelf with Tray, Good Air Circulation for 482.6mm Network Cabinet or Equipment Rack

Just received these and found that the front lip is extremely high, measured at 5/8\". I suppose this is fine for larger items (e.g. the nominal 50lb limit), but for the moment I'm putting a relatively small network switch on the shelf. The lip covers fully half of the height of the lower row of ports, forcing me to shove the switch back quite a bit for the cables to fit, and then I'm going to have to lift up the switch every time I need to connect something to it. I would recommend reducing the height of the lip by 1/2, if necessary putting either a secondary outward bend in it or a lengthwise \"dimple\" to add rigidity to the shorter lip. I'll try to remember to update this review when I've had more time using them with larger equipment (e.g. my NAS's that will go on the second shelf). In the meantime I need to find a shelf that's more appropriate for this particular location...

Just received these and found that the front lip is extremely high, measured at 5/8\". I suppose this is fine for larger items (e.g. the nominal 50lb limit), but for the moment I'm putting a relatively small network switch on the shelf. The lip covers fully half of the height of the lower row of ports, forcing me to shove the switch back quite a bit for the cables to fit, and then I'm going to have to lift up the switch every time I need to connect something to it. I would recommend reducing the height of the lip by 1/2, if necessary putting either a secondary outward bend in it or a lengthwise \"dimple\" to add rigidity to the shorter lip. I'll try to remember to update this review when I've had more time using them with larger equipment (e.g. my NAS's that will go on the second shelf). In the meantime I need to find a shelf that's more appropriate for this particular location...

It was nice that they included M6 screws, but they are too large for the server rack which uses standard 10=32 ones

Fais le travail mais attention au poids Qualité moyenne, il ne faut pas trop charger sinon les étagères s’affaissent. Belle peinture noire

The width is too narrow, my Ubiquiti equipment is too big for their selves. I need to flip the self upside allowing the width to fit. Doing it this way allows the equipment to slide all over with any rack movement

They work well and were easy to install. I'm only giving three stars, though, because they were both bent upon arrival.

A simple product for just one specific application. However, I had to wait a very long time for delivery. Unfortunately, it was not possible to contact the delivery company, so I just had to wait!