Customer Reviews for VEVOR 24 x 30 x 40 Inch Stainless Steel Work Table, Commercial Food Prep Worktable with Casters, Heavy Duty Prep Worktable, Metal Work Table with Adjustable Height for Restaurant, Home and Hotel

This table is well crafted but oddly short at 26” high. Not suitable for an Ooni gas pizza oven. Too much bending over. Tried to source leg extensions through the Vevor website. No luck.

Ich kaufe ein Produkt frei Haus und bekomme dann von DHL eine Rechnung für die Verzollung zu ca.25% vom Kaufpreis. Das geht nicht!

The legs did not have the pre-drilled mounting holes in the proper location and were hard to line the bolt threads up correctly. The threaded support feet on each leg were cheaply made and had loose threads.

The table itself isn't too bad and is as stated. Don't quite understand why it's 38" high which is above normal for most anything. Of course I knew that when ordering. The biggest problem is the sticky vinyl covering they use to protect top and shelf. It is way to sticky and wraps under the top and shelf. I took about 3-4 times longer to remove the covering than it did to assemble the unit!! Surely there is a better less hassle way of doing this.. Gerry

Vevor advertises this as a work table, suitable, among other things, for food prep. The legs are only 26 inches high, making it very hard to chop vegetables unless you are size compromised. The proper classification for this is an equipment stand, which restaurants use for placing mixers, coffee makers, soda pop dispensers, etc. An actual work table will usually have a height in the area of 34 inches.

The quality of the stainless is ok. The instructions are really not great but it’s easy enough to figure out. The table arrived pretty severely dented and have been attempting to contact vevor for 3 days. No response.

RAZOR sharp edges!!! Super sturdy but expect to sand down all the edges. They literally sliced thru the sand paper.

This arrived earlier than predicted and was fairly easy to put together. HOWEVER, the holes for the screws and the way everything lined up, especially for the bottom shelf did not line up evenly. There are only three levels provided as options where you can put the bottom shelf. I wanted to put the bottom shelf on the very bottom, closest to the floor. The only way for me to get the bottom shelf screwed into place was the first option, the closest to the top. I didn't have any other choice because the screws would not go in or line up properly at any other level. I have an item that is over 400 lbs that will have to sit on the very top. It states it can hold over 900 lbs! Fingers crossed it can hold and I get my way with at least one thing when it comes to this table.

J’attendais une table de 95,5 cm de haut et j’ai reçu une table de 100,6 cm de haut ! Ce qui dépasse la hauteur de mes autres équipements ! La qualité de l’inox reste à tester à l’extérieur. À suivre car épaisseur faible

Item was packaged poorly and arrived bent