Customer Reviews for VEVOR 10U Open Frame Network Rack, 585 mm Depth, Wall Mounted or Floor Standing Server Rack, Heavy Duty 4 Post, with Vented Shelves & Mounting Hardware, Holds All Your Networking IT Equipment AV Gear

500% better then any other found unit. Very strong, both sides usable, neatly marked parts for assembly. OUTSTANDING… Tom

Great quality and I like it. Just took a little to build since the instructions were somewhat unclear on the pieces labeled 4 and 5. Forced me to unscrew and flip some pieces around.

this thing is Awesome value. it pro grade? no, but its 12u, so you're probably using it for a home lab. Works great for me, perfect size for a couple servers, UPS, NAS and some networking equipment

I use this Rack for my home lab/media server. In this rack I have a 4U server case with 15 3.5" HDD, 1U surge protector, a Blonder Tongue Audio/Video modulator, network switch, and KVM. It is sturdy, and rolls well even over carpet. Nobody else is offering something as nice at this price point. Vevor is my go to place to buy White label products.

Dollar for dollar, you won' find a better deal on a rack that adjusts to long (real!) servers! I keep buying Vevor...the more I browse, the more I buy lol

Probably the best rack for mo ey on the market. Seriously sturdy, easy to assemble. Recommended for studio owners with many outboard equipment or anything in 19" format.

Great, but a little time consuming to build

Overall, the rack is great and give it 5 stars for the price. The installation, however, is 2 stars. You first have to use the PDF version of the manual to even figure out what the steps are because the printed manual is of very low quality. While you will eventually figure it out, it is not evident right away and takes some time to determine the proper orientation. There's definitely no way you can use a hand driver to tighten the screws since it is not predrilled/threaded. You may not need an impact wrench depending depending on what type of electric drill you have. The screw heads are like butter and get stripped pretty easy so be careful.

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

Easy to assemble, shipped quickly in a flat pack with many parts preassembled. Flexible size. Only small improvement I could suggest is that the screw holes (there area a lot of them) are tapped most of the way through, but the first time screwing them together takes some strength to get through the last bit or the hole. It feels like a hard stop and the screw has to cut the last tiny bit of the thread. top is sturdy enough to hold up a monitor, or some other equipment. If the screw holes went all the way through I would have given it 5 stars.