Customer Reviews for VEVOR Washdown Pump, 20 LPM 70 PSI, Max. Self Priming Water Pump, with EPDM Valve, Universal Salt Water Strainer & Female/Male Thread, for RV, Marine Deck, Yacht

Works well. attached in place of 10 year old existing RV pump. Not difficult to install. Recommended if you prefer 120v.

seems to work well after getting the bypass and pressure switch adjusted. The pressure switch seems to chatter the motor(cut in and out rapidly) as it reaches the shutoff pressure. I am using this to pump water from a tank into a pressure tank and drip irrigation system. I have the bypass closed completely since it is filling a pressure tank and then can shut off for 15 minutes before needing to pump again. it seems to put out the advertised flow rate. my only complaint so far is the threaded fittings don't seem to be true pipe thread as they wont tighten up without bottoming out so you will need to use alot of thread tape. Also the strainer it comes with works well but filters from the inside out so you cant see when its plugging up.

This was the correct pump ut it took forever to get it

Good pump for the money i have 2 of the 70psi ones and both of them I had to turn down the pressure because they wouldn’t shut off. Id probably get the 45-50psi one next time.

Have 2 of these and got the 70psi and had to dial back the pressure screw to get to shut off. Not a bad pump for the price.

Works great. Add a fuse and switch. Needs adapters to attach garden-hose-threaded hoses.

Bought to have a spare for my concession trailer My other spare I gave to another vendor that needed one Looks like the one that came with my custom built trailer Have not have to use it yet But I’m sure it’s good quality like all the other products I have purchased from Vevor

We bought this to replace our water pump at the cabin. It works great!! This was a great price and arrived quickly!

moves water

Ottima pompa, buoni gli attacchi con connettore rapido però sconosciuti in commercio, almeno nella mia zona. Forse con ingresso ed uscita filettato da 1/2" , benché soluzione vecchia, sarebbe stato più pratico.