Home Painting Painting Equipment & Supplies Pressure Paint Pot

VEVOR Spray Paint Pressure Pot Tank, 10L/2.5gal Air Paint Pressure Pot, Metal Rack & Leak Repair Sealant for Industry Home Decor Architecture Construction Automotive Painting, 70PSI Max

Litres: 10 L Spray Nozzle Diameter: None

Questions and Answers

9 Questions

Hello! I’m just wondering if this is good to go for resins casting right away or if it needs a little rework before use? And If so what? Thank you for any help ^.^

Answer This Question

Yes, you can use it directly, and you need a compressed air pump to pressurize it.

By vevor

Helpful? 2

hello! what specific air compressor does this need? ie. may i have the model number?

Answer This Question

General compressors can be used, there is no specific model that must be used, the higher the wattage, the faster the inflation.

By vevor

Helpful? 1

I bought 1.5 mm + 4.0 mm 10L. How can I remove a suction tube and close the outlet?

Answer This Question

To remove the suction tube: Use a hot air gun or a flamethrower to heat the connection between the suction tube and the lid. When the glue starts to smoke, use a pipe clamp to clamp the suction tube and turn it counterclockwise. To close the outlet: Use a 3/8 threaded internal plug.

By vevor

Helpful? 0

I see that someone has already asked a similar question, but this link for "https://we.tl/" does not work - I suspect that VPNs are blocking access. Do you have a diagram showing the size and type of thread for all connections... both attached components and the tank?

Answer This Question

Please see the manual in below link for reference, the link is valid in 3 days: https://we.tl/t-dWt0IkDTao

By vevor

Helpful? 0

What adapter would I need to be able to pressurize this pressure pot with a bike pump? I’m guessing a 1/4 inlet TO a Schroeder valve (for the bike pump?)

Answer This Question

Please refer to the pictures to purchase：https://we.tl/t-3fdDWW6CMu

By vevor

Helpful? 0