VEVOR Fuel Vacuum Carburetor Synchronize Tool Kit Fuel Vacuum Carburetor Synchronizer carb sync Gauge Set with Rubber Hose
Questions and Answers
5 Questions
What size are the brass threaded ends?
How do I reset the gauges to a common point.
There is no access to the screw at the front of the gauge
No hole in the glass. Ken
Will this work for a 50 hp Mercury outboard, 3 carbs.?
Will this item work to test outboard with 6 cyl?
This item is good if the carbs do not have a common vacuum source or one that can be separated.
If the carbs or devices share a vacuum source you only need one gauge per source.This is designed for any 2 to 4 cylinder carb 4 stroke engine. It can be used on a six cylinder but you will have to switch the lines many times back and forth to verify sync to all cylinders.
By vevor
Will this work on a 1996 johnson 150 outboard engine with six carbs?
If it is a 4 stroke and you move the lines around many times to verify sync it is possible. 6 gauges would be easier. Most outboards then we’re 2 stroke. If so, it won’t. You just set each carb by ear and rpm average.
By vevor
