VEVOR Dividing Head BS-0 127mm 3 Jaw Chuck Dividing Head Set Precision Semi Universal Dividing Head for Milling Machine Rotary Table Tailstock Milling Set
127 mm
Questions and Answers
10 Questions
Can you get gears for differential indexing?
It comes with 3 indexing plates for any combination you might need. The most important thing you need to do before using is take it completely apart including the chuck and deburr , clean and put in some good grease and oil, it is horrendously dirty inside, otherwise it seems of good quality.
By vevor
Can I use this as a welding positioner turntable with a drill connected to it?
Yes you could absolutely use this as a welding position/turntable. If your mechanically inclined it would be simple to set it up with a motor and footswitch for welding
By vevor
This can be used as a vertical OR horizontal table?
Yes. You can tilt the head 90 degrees. Make sure a verical table is sturdy. The rotating head is heavy.
By vevor
Is the BS - O a universal unit?
Or just a dividing unit and only cut straight gears?
What is the difference between semi-universal and universal?
A semi-universal can only cut straight gears as where the universal models have linkages that allow helical cut gears to be cut.
By vevor
