Home Electrical Electric Motors Variable Frequency Drives

VEVOR Variable Frequency Drive VFD 1.5KW 220V 2HP CNC Motor Inverter Converter

Power: 1.5KW Voltage: 220 V

See all buying options

Questions and Answers

21 Questions

or Ask a Question

Hi not sure, but how the 3 phase at 220 V works in Australia where the 3ph voltage is 400?

Answer This Question

If this is the case, you only need to input single-phase 220V. Never input three-phase 380V. Yours is a three-phase 400-volt power supply. If three phase lines are input to the inverter, it will burn out immediately.

By vevor

Helpful? 7

When forward and reverse is controlled via the external inputs can the forward and reverse be set at different speeds.

Answer This Question

Yes, the forward and reverse can be set at different speeds.

By vevor

Helpful? 1

what is the ip rating of this VFD and does it have a product mark with a tick mark in a circle and in a triangle?

Answer This Question

Its rating is ip30. The inverter outputs three-phase 220. The housing is provided with wiring ports marked with terminals.

By vevor

Helpful? 1

Will cutting power to this VFD (eg via e-stop activation) while it is powering a spindle motor damage it?

Answer This Question

Use the emergency switch to disconnect the power supply of the inverter, but do not disconnect the connection line between the inverter and the motor. Disconnecting the connection line between the inverter and the motor may damage the inverter, but disconnecting the power supply of the inverter will not.

By vevor

Helpful? 0

can you use this converter on 10 kva generator to house

Answer This Question

No, this output can only be used for motors, not for home power supply.

By vevor

Helpful? 0