Customer Reviews for VEVOR Digital Ultrasonic Cleaner 6L with Heater Timer for Dentures Jewelry Coins

I purchased this primarily for cleaning gun parts and along with Hornandy cleaner it is very effective in that capacity. The size and shape of the tub is perfect for cleaning a variety of parts without requiring excessive cleaning solution and the drain valve is extremely convenient for draining and cleaning the device afterwards. The description did not mention anything about a drain hose but mine included one which is very handy for draining the used solution into a milk jug without making a mess.The heating element worked very fast and using the cleaner is intuitive. I am not certain where the temperature sensor is located though as it did heat the solution slightly hotter than what I set it to, but that wasnt really a problem, it was just a few degrees.You just need to be sure to take care to remove all moisture from the parts afterwards and re-lubricate as it completely strips away all deposits including oil.-KBK

1. It works. I ran the aluminum foil test twice and it worked as expected.2. It does hold 6L. Read below for more on that.3. It seems well constructed. Nothing feels like it going to break through normal use.4. The heater can be used without turning on the ultrasonic portion. Some other units don't have that feature.I wanted to give this unit 4 stars, but it did everything the listing said it would. The biggest reason is the capacity. Just like all the other units it doesn't seem like it holds its rated volume, and looks smaller than you expect. When I drained off the cleaning solution (Simple Green and water) I ended up with 5.2L so I decided to measure its max capacity. With nothing in it and filling it to the very edge of spilling over it does indeed hold 6L, but you would never use it that full as even putting the lid on displaces a small amount. Draining it to the fill line removes 1.1L, and of course you would drain even more out once you put the basket and your parts to clean in the unit.I chose this unit over some of the other ones due to the higher quality stainless steel, and it does feel sturdy and cleans up nicely. The controls and drain valve work nicely and the small parts/jewelry basket is well constructed. The parts basket could definitely be bigger and I would prefer the one that hangs on the sides rather than this one with the little feet on the bottom. If needed I will construct my own basket. The unit unexpectedly came with a bonus nylon reinforced hose with a threaded attachment that screws into the drain valve to make it easier to drain the unit. The timer ranges from 0 - 30 minutes, and you can press the button while in use to shorten or extend the time (still limited to 30 mins). The heater ranges from 0 - 80º and you can operate it separately from the ultrasonic function (I almost burned myself testing that). The heater is concentrated in one small area rather than spread out so it would take time and circulation to heat up the entire reserv

Good

I've never used one of these before so I have nothing to compare it to. It seems to clean well - I bought it for cleaning carburetors. It's noisy, but people tell me that's normal.

So far it is working good.

I give the Moogorn 6L Professional 5 stars based on my perceived value. I bought this unit to clean rifle brass for reloading as well as carburators as needed. So far I have only used it on the rifle brass about 6 times and it has proved excellent for this so far. The included drain valve and hose are a great addition and make draining solutions for storage or disposal a breeze. I was expecting it to be louder based on the reviews I read but was very satisfied with the noise level in my unit...However, I did measure the sound level and it was 89db right next to the unit and that dropped 10db to 79db 3' away. The noise frequency is a mix from about 100hz to 18khz so maybe my 65yr old ears are not as sensitive as others. It runs in my shop so it is just not an issue for me, even if I am doing other work in the shop. The unit appears to be very well made in fit, finish and materials. The temperature reading showing the "Actual Temperature" reads about 20 degrees lower than the bath temperature I measured with a thermometer. If that temperature is critical for your application I would suggest you check it with an immersed thermometer.

Thank you

works great

This unit is great does everything it says it that it should do. I use it for fishing reel cleanings and it has worked flawlessly. Only issue that I ever had is that it took a while to heat up so now I just leave turned on and reduce the temperature and now don't have that problem. Thanks for the quality product. RF

It was a great unit. Mine also came with the hose to drain it which was nice.