Customer Reviews for Ultrasonic Cleaner 1.3 L Ultrasonic Parts Cleaner with Heater Timer,

I have been using the ultrasonic cleaner for 6 months now an average of 3 times per week and have had no issues. When the ambient temperature is around 65-70 centigrade it takes approximately 15-20 minutes to come up to the temperature set starting with a cold solution. It maintains temperature to withing plus/minus 5 degrees. When the ambient temp is approximately 50 degrees it takes about 30-35 minutes to temperature. Use, cleaning everything from small engine parts, firearms, motor parts, gears, tools ect. I have been very pleased with the results. I think any issue in the cleaning process would be the solution used. I have found that best results are achieved with the right solution specifically made up to what you want to achieve. Noise, I find this machine to be very quite, it is easy to work next to it while it is on. The noise fluctuates depending on the parts you have in there and they way they are placed. However I have never found the need to leave the room while it is on. I would recommend this model without hesitating.

Cleaned a gummed up carb perfectly after sitting for a few years with gas inside. Very safe on all the components. No harsh chemical smell with the cleaners that I used.

I have had no issues with this. I can fit just about any part I need to clean in here. Does great with carbs

I must start out by saying that I'm very impressed with this product. The quality is great and appearance is very keen. The functionality of this product is as advertised. The heating element does great and the timer allows easy setup. The basket makes it easy to place in smaller objects and removal just as simple. The drain hose and valve make it very convenient so that the ultrasonic cleaner itself doesn't have to be moved. If you're looking for a great product that can clean and accommodate most commonly used objects, this one is it.

Good price and works well . Cleaned all items that I have put in the unit to a satisfactory standaerd.

using it 5 minutes, seem to be working thk , 0mg i need 100 characters more what am i writing a book

This machine is amazing!!!! It cleans silver jewelry like nothing I've ever used before . All of my wife's diamond jewelry looks better than new!

Too loud to talk over on the sales floor, but it is fine for our Goldsmith shop in the back

There’s plenty of these out there that are smaller for more money. This thing is sweet! Takes a good few minutes to get hot, but other than that no complaints here. I have examples here in the photos of cleaning some parts from a 5.7L hemi that sat for almost a year with neglect from oil changes. You can imagine the oil and grime stuck to these parts, but it’s coming all off! Definitely worth every Penny if you’re like me rebuilding engines at home. FYI, does the special cleaner that’s meant for this work better? Yes, but at around 40-50 bucks a gallon, doesn’t seem practical. I myself use purple power and a little less abrasive especially if you decide to let it run awhile.

Without doubt one of the best things I ever bought my missus. The way this ultrasonic cleaner brings up her jewellery... it all sparkles like I've only just perched them. Totally satisfied and fully recommend