Customer Reviews for VEVOR 300 x 140 mm Travel Compound Milling and Drilling Slide Table X Y Axis

If you want a simple work table to use, especially for your drill press, this is a great table to consider and purchase. I found it to be accurate enough for what I am going to do with it. Is this something to use a professional machine shop and for cranking out a ton of parts? No -- but that should be apparent by the price point.The table requires some prep work once it arrives. This is what I did:1) Unwrapped and sprayed it down with brake cleaner to get all the nasty oil/grease off2) Disassembled the entire unit and sprayed it down again3) Took a wire brush to all the channels and guide areas to remove excess paint4) Sanded down the top deck to make sure it was truly flat5) Filed down all the spacers in the channel guides to remove any burrs6) Took a dremel with a sanding drum and knocked down all the edges7) Reassembled and greased the guides

Obviously price has a lot to do with the purchase of this product . A good solid base to begin with is the most important feature . This cross slide table comes with a few minor faults such as two missing thrust bearings from the slide shafts and the keys have to be cut down to enable the added bearings to fit . These are only minor items and cheap to rectify , and when repaired and the gibbs set right the slides work extremely well with little to no play and ease of movements in both directions , making this unit absolutely recomendable for the small home engineering jobs on the drill press and milling machine

Better than expected for the price.

Works well thanks

great value for the money

Gibs needed adjusting, but very happy with the quality!