Customer Reviews for TIG-200 AC/DC TIG MMA Welder Pulse 200 Amp Inverter Welding Machine

Being new to TIG welding, I did a lot of research and YouTube watching. I created a checklist of what I thought I needed and this was the cheapest on Amazon that checked all the boxes. So far, DC welding has been great. The pedal is only in/off so I haven't bothered with it, I use the already installed switch on the torch. Everything seems to be easy to setup once you understand the settings and this novice has been having great success with it.If I was to have a main complaint, it is with the regulator, it didn't fit my tank and I bought another $25 regulator to resolve the problem.

Unboxed the unit and got a good look at all of it first. Comes with all the leads and a cheapy welding mask lol. The tig torch is surprisingly good, has a nice switch on the torch. The ground and stick torch are nice and sturdy but unfortunately the leads for them are pretty short only about 5 or 6 foot. That said I have welded half inch hardened steel and as thin as 20ga thin wall tubing.

I feel it is very worthy to spent every dollar on this welder.

I've got about 6 hours of welding time on it, now. For the money, it's not bad at all. Just don't try any heavy material. I'm pretty sure if you stick to thin metal, it should be ok. Four star, it only added 10 horsepower to my car. Gotta add 25 horsepower if you want 5 star. I have to poop, now. Thank you

Good tig for the price. Using it for body work on an old car. Works fine for sheet metal. Have not used for anything else.

Where do I find a remote and how do I wire it I’ve tried a few still can’t get it to work

Despite the answer from the "The company" this welder does work on 220 volts. Simply order an adapter and plug it into 220 and it works. I went through customer support and waited a week for an answer and they finally said if only works on110 volt despite the product description and the labeling on the product. I then asked the question on the product page an amazon and a user said get an adapter which I already had. Plugged it in and walla! I had tought this was the answer but wanted to be sure. The welder works fine and seems to get more power from 220.

Good value and good product so far.

We purchased this machine for my 24yo son. He has weld with mig and stick and wanted a tig machine. We looked at several and decided on this one. What a great choice. It is light weight and easy to use, especially for beginners. He said it is the best machine he has used. It is capable to stick welding also. He was very impressed with that as well. Worked better than his gas powered stick welder. Also note that this product was delivered within 3 days of purchase. We are very pleased all around.Thank youGM

great welder for how cheap it is, welds beautifully, the only issue i have is the foot pedal cover is a slight bit too low and makes it hard to use with steel capped boots on, great welder would recommend to anyone looking for a ac/dc tig welder that is on a tight budget.